Elite RS 1 Loop, Grey Color Analogue Addressable Fire Control Panel UL/FM Approved Elite RS is a versatile range of open protocol fire alarm control panels. Available with one or two detection loops capable of hosting up to 254 Hochiki or Apollo UL devices. Elite RS uses microprocessor-based electronics to provide a flexible control system with high reliability and integrity.…
Elite RS 2 Loop, Red Color Analogue Addressable Fire Control Panel UL/FM Approved Elite RS is a versatile range of open protocol fire alarm control panels. Available with one or two detection loops capable of hosting up to 254 Hochiki or Apollo UL devices. Elite RS uses microprocessor-based electronics to provide a flexible control system with high reliability and integrity.…
Elite RS 2 Loop, Grey Color Analogue Addressable Fire Control Panel UL/FM Approved Elite RS is a versatile range of open protocol fire alarm control panels. Available with one or two detection loops capable of hosting up to 254 Hochiki or Apollo UL devices. Elite RS uses microprocessor-based electronics to provide a flexible control system with high reliability and integrity.…
Sigma A-XT Surface mounting panel - Red 230V Sigma A-XT releasing panel offers outstanding value and performance for all small to medium fixed firefighting installations. With three initiation circuits as standard, release can be configured to activate from any combination of detection zone inputs to allow (among other combinations) any two from three types of activations. For example, as would…
Multi-Criteria Sensor ACC-V, a Multi-Criteria Sensor that is particularly suited for detecting smoke produced by a wide range of combustibles found in various applications. Temperature monitoring is achieved by a thermistor placed for optimum sensitivity. UL Approved Fire Detection Product code: ACC-V
Hochiki Analog Photo Smoke Sensor ALN-V, a Photoelectric Smoke Sensor that's particularly suited to detecting optically dense smoke typical of fires involving materials such as soft furnishings, plastic, foam, or other similar materials that tend to smolder and produce large visible smoke particles. Hochiki's unique design allows fast response to flaming fires as well as smoldering fires while preventing false…
Hochiki Analog Heat Sensor ATJ-EA, a Fixed Temperature / Rate of Rise sensor that provides accurate temperature measurement data to the fire alarm control panel. These sensors are well-suited for environments where dust, cooking fumes, or other factors make the use of smoke sensors impractical. Low profile - only 2.00" high, including base Approved UL Fire Detection Product code :…
Single Action with Key Lock Addressable Manual Pull Station DCP-AMS are the Hochiki America series of addressable manual pull stations that provide a fast and practical means of manually initiating a fire alarm signal. Both single-action and dual-action manual pull stations are available. Resetting of the pull station requires either a Cat 30 key or a 1/8" hex key (depending…
Dual Action Addressable Manual Pull Station DCP-AMS are the Hochiki America series of addressable manual pull stations that provide a fast and practical means of manually initiating a fire alarm signal. Both single-action and dual-action manual pull stations are available. Resetting of the pull station requires either a Cat 30 key or a 1/8" hex key (depending upon the model…
4" SENSOR BASE, BONE COLOR The YBN-NSA-4 and HSB-NSA-6 are designed specifically for use with the Hochiki NS Analog models AIEEA, ALG-V, ALK-V, ALK-D, ALN-V, ATG-EA, ATJ-EA and ACA-V. The YBN-NSA-4 and HSB-NSA-6 common mounting bases allows for complete compatibility for all of the Hochiki NS Series Analog sensors. The bases are lightweight and very thin, providing a low profile…
6" SENSOR BASE, BONE COLOR The YBN-NSA-4 and HSB-NSA-6 are designed specifically for use with the Hochiki NS Analog models AIEEA, ALG-V, ALK-V, ALK-D, ALN-V, ATG-EA, ATJ-EA and ACA-V. The YBN-NSA-4 and HSB-NSA-6 common mounting bases allows for complete compatibility for all of the Hochiki NS Series Analog sensors. The bases are lightweight and very thin, providing a low profile…
SCI-B4 - 4" SENSOR BASE, BONE COLOR WITH ISOLATOR The HOCHIKI America SCI-B4 and the SCI-B6 are short circuit isolation mounting bases containing a simple rugged design with screw terminals for wiring connections. These common mounting bases allows sensor interchange and maintains loop continuity when sensors are removed. A simple anti-tamper head locking system is provided which is enabled by…
SCI-B6 - 6" SENSOR BASE, BONE COLOR WITH ISOLATOR The HOCHIKI America SCI-B4 and the SCI-B6 are short circuit isolation mounting bases containing a simple rugged design with screw terminals for wiring connections. These common mounting bases allows sensor interchange and maintains loop continuity when sensors are removed. A simple anti-tamper head locking system is provided which is enabled by…
CLIM-1 CURRENT LOOP INPUT MODULE, SINGLE INPUT The Current Loop Input Module (CLIM) is ideal for sensors and devices in environments such as HVAC, Boiler Equipment, Oil & Gas, and Explosive areas that provide a 4-20 mA output Product code: CLIM-1 CURRENT LOOP INPUT MODULE, SINGLE INPUT CLIM-2 CURRENT LOOP INPUT MODULE, DUAL INPUT
CLIM-2 CURRENT LOOP INPUT MODULE, DUAL INPUT The Current Loop Input Module (CLIM) is ideal for sensors and devices in environments such as HVAC, Boiler Equipment, Oil & Gas, and Explosive areas that provide a 4-20 mA output Product code: CLIM-1 CURRENT LOOP INPUT MODULE, SINGLE INPUT CLIM-2 CURRENT LOOP INPUT MODULE, DUAL INPUT
Conventional Zone Input Module DCP-CZM, the Conventional Zone Module is designed for use on an analog addressable Fire Alarm system. Up to 127 devices can be placed on a single SLC loop. The device address is uniquely stored on an onboard EEPROM The module allows the panel to interface and monitor two-wire conventional detectors or pull stations. Each DCP-CZM transmits…
DH-100-A ADDRESSABLE DUCT DETECTOR The HOCHIKI AMERICA DH-100-A Analog duct smoke detector provides early detection of smoke and products of combustion present in air moving through HVAC ducts in Commercial, Industrial and Residential applications. The DH-100-A is designed to prevent the recirculation of smoke in areas by the air handling systems, fans and blowers. Complete systems may be shut down…
DH-99 DIGITAL ANALOG DUCT DETECTOR The HOCHIKI AMERICA DH-99 Digital Analog duct smoke detector provides early detection of smoke and products of combustion present in air moving through HVAC ducts in Commercial, Industrial and Residential applications. The DH-99 is designed to prevent the recirculation of smoke in areas by the air handling systems, fans and blowers. Complete systems may be…
DH-99 DIGITAL ANALOG DUCT DETECTOR The HOCHIKI AMERICA DH-99 Digital Analog duct smoke detector provides early detection of smoke and products of combustion present in air moving through HVAC ducts in Commercial, Industrial and Residential applications. The DH-99 is designed to prevent the recirculation of smoke in areas by the air handling systems, fans and blowers. Complete systems may be…
Dual Input Monitor Module DCP-DIMM (Dual Input Monitor Module) is designed for use on a UL-listed Fire Alarm Control Panel. It provides two independent contact monitoring circuits while only utilizing one address on the SLC loop. Up to 127 devices can be placed on a single SLC loop. The device address is uniquely stored on an onboard EEPROM. The module…
Fast Response Contact Monitor for 4" Box Class A Isolator The Hochiki FRCMA/-I Fast Response Contact Monitoring Modules are designed to be used with pull stations, water flow switches, and other applications requiring the monitoring of dry contact alarm initiating devices.The interrupt driven Digital Communications Protocol (DCP)combines maximum communication reliability and fast response to emergency conditions.
Fast Response Contact Monitoring Module The Hochiki DCP-FRCME-M Fast Response Contact Monitoring Modules are designed to be used with pull stations, water flow switches, and other applications requiring the monitoring of dry contact devices. The interrupt driven Digital Communications Protocol (DCP) combines maximum communication reliability and fast esponse to emergency conditions. The DCP-FRCMEM contact monitoring module does not require a…
FAST RESPONSE CONTACT MONITORING MODULE WITH PIGTAILS The Hochiki DCP-FRCME-M Fast Response Contact Monitoring Modules are designed to be used with pull stations, water flow switches, and other applications requiring the monitoring of dry contact devices. The interrupt driven Digital Communications Protocol (DCP) combines maximum communication reliability and fast response to emergency conditions. The DCP-FRCMEM contact monitoring module does not…
Dual Relay Module 24v or 220V, 8 AMPS The Dual Relay Modules (R2ML/H Series) have been designed to provide flexible and quick response to emergency conditions. The R2ML/H Series allows independent control of two form C contacts for a variety of normally open and normally closed contact applications such as fan operation, elevator recall, door closure, ad auxiliary notification. Product code:…
DUAL RELAY MODULE 8 AMPS WITH ISOLATOR The Dual Relay Modules (R2ML/H Series) have been designed to provide flexible and quick response to emergency conditions. The R2ML/H Series allows independent control of two form C contacts for a variety of normally open and normally closed contact applications such as fan operation, elevator recall, door closure, ad auxiliary notification. Product code:…
DUAL RELAY MODULE 2 AMPS The Dual Relay Modules (R2ML/H Series) have been designed to provide flexible and quick response to emergency conditions. The R2ML/H Series allows independent control of two form C contacts for a variety of normally open and normally closed contact applications such as fan operation, elevator recall, door closure, ad auxiliary notification. Product code: DCP-R2MH :…
DUAL RELAY MODULE, 2 AMPS WITH ISOLATOR The Dual Relay Modules (R2ML/H Series) have been designed to provide flexible and quick response to emergency conditions. The R2ML/H Series allows independent control of two form C contacts for a variety of normally open and normally closed contact applications such as fan operation, elevator recall, door closure, ad auxiliary notification. Product code:…
SHORT CIRCUIT ISOLATOR Can be placed at any location on SLC loop Checks the line for short circuit at power up. If the line is normal, the relay will be returned on. If a line short is detected, the relay remains open Indication of a single short circuit by a yellow LED Product code: DCP-SCI
Supervised Output Module 4" Class A The Class A Supervised Output Modules (DCP-SOM-A & SOM-AI) have been designed to provide application flexibility and quick response to emergency conditions. Flexibility is provided by a wide range of operating modes, including supporting multi-zone operations, and/or functions, up to 16 different modulation patterns and multi-state programming. The operating parameters for the DCP-SOM-A &…
Supervised Output Module Preaction Releasing Module The Supervised Output Module (DCP-SOM-R) is designed for Single-Interlock Pre-Action sprinkler systems. During an alarm condition, the DCP-SOMR output will operate which will trip a solenoid valve, allowing water to fill the sprinkler system piping. Water is not discharged until a sprinkler head operates due to heat from the fire. Pre-Action systems provide an…
Photo Electric Conventional Detector UL SOC-24VN is a reliable, high-quality Photoelectric Smoke Detector. It can be used in all open areas where Photoelectric Smoke Detectors are required, including in-duct applications. The computer-designed smoke chamber makes the SOC-24VN well suited for detecting smoldering fires as well as fast flaming fires. NS-4 Series, NS-6 Series, HSC-4R, or HSC-R Style bases may be…
Conventional Multi-Criteria (Smoke/Heat) Smoke Detector SOE-24H is (UL 268 7th edition listed) is a combination smoke and UL 5217th Edition listed heat detector.The new multi-spectrum smoke categorization technology detects smoldering and flaming fires, including polyurethane fuels, while reducing nuisance cookingalarms. Product code : SOE-24H
Hochiki Conventional Photoelectric Smoke Detector SOE-24V (UL 268 7th edition listed) is the newly developed multi-spectrum smoke categorization technology that detects smoldering and flaming fires fueled by traditional materials and polyurethane while reducing nuisance alarms. Product code : SOE-24V
Projected Beam Detector The Hochiki SPC-24 Projected Beam Smoke Detector consists of an emitter and receiver. The SPC-24 detector should be placed so that smoke generated by a fire will likely rise into the path of the beam. The receiver is constantly monitoring and measuring the intensity of the beam transmitted by the emitter. Should the smoke from a fire…
135 Degree Fixed Temp or Rate of Rise Detector DCD-135, a fixed temperature/rate-of-rise heat detector is suited for installation where high heat output fires are expected or in areas where ambient conditions would not allow the use of other detection methods. Heat detectors are intended for the protection of property. Do not rely on heat detectors for life safety protection.…
Fixed temperature/rate-of-rise heat detector 190°F DCD-190, a fixed temperature/rate-of-rise heat detector is suited for installation where high heat output fires are expected or in areas where ambient conditions would not allow the use of other detection methods. Heat detectors are intended for the protection of property. Do not rely on heat detectors for life safety protection. Where life safety is…
Fixed temperature heat detector 135°F DFE-135, a fixed temperature heat detector that is suited for installation where high heat output fires are expected or in areas where ambient conditions would not allow the use of other detection methods. Heat detectors are used for property protection. Do not rely on heat detectors for life safety protection. Where life safety is involved,…
Fixed temperature heat detector 190°F DFE-190, a fixed temperature heat detector that is suited for installation where high heat output fires are expected or in areas where ambient conditions would not allow the use of other detection methods. Heat detectors are used for property protection. Do not rely on heat detectors for life safety protection. Where life safety is involved,…
Hochiki Conventional Duct Smoke Detector DH-100-P 4-wire duct smoke detector provides early detection of smoke and products of combustion present in air moving through HVAC ducts in Commercial, Industrial, and Residential applications. Air sampling is accomplished by two tubes that protrude into the duct. The 7.5" exhaust tube is supplied with the duct smoke detector unit. Once the duct width…
Rate of rise heat detector DSC-EA, the rate of rise heat detector is suitable for use in most applications that require heat detection. Please note that special attention should be given to avoid installation in direct line with hot air heaters, above stoves, ovens, or other heat-generating objects. The DSC-EA rate of rise heat detector is composed of an air…
Fire Alarm Bell 6” (Indoor Use) FBB-150K is a 6” Fire Alarm Bell for indoor use, weighing approximately 520g. The bell has an operating temperate range of -10°C to 40°C. Product code: FBB-150K
Hochiki Pull Stations (HPS series) Each model is constructed of a solid die cast housing and comes in glossy red. The back switch plate is plated steel. The electrical switch is rated for 10 Amps @ 120 VDC normally open contact rating. All models are connected via terminal block connections. Product code: Hochiki's HPS series pull stations are available in…
Hochiki Pull Stations (HPS series) Each model is constructed of a solid die cast housing and comes in glossy red. The back switch plate is plated steel. The electrical switch is rated for 10 Amps @ 120 VDC normally open contact rating. All models are connected via terminal block connections. Product code: Hochiki's HPS series pull stations are available in…
Hochiki Pull Stations (HPS series) Each model is constructed of a solid die cast housing and comes in glossy red. The back switch plate is plated steel. The electrical switch is rated for 10 Amps @ 120 VDC normally open contact rating. All models are connected via terminal block connections. Product code: Hochiki's HPS series pull stations are available in…
Hochiki Pull Stations (HPS series) Each model is constructed of a solid die cast housing and comes in glossy red. The back switch plate is plated steel. The electrical switch is rated for 10 Amps @ 120 VDC normally open contact rating. All models are connected via terminal block connections. Product code: Hochiki's HPS series pull stations are available in…
Conventional Detector Base 4" NS6 base is an electronics-free 6" base featuring a plastic tamper-lock lug. Each base is equipped with a resistor. The NS4 base is a 4" version of the NS6 base. Product code: NS6-224 OR NS4-224 : 43mA (70mA @ 33.0V MAX) HB-5 NS6-220 OR NS4-220 : 93mA (136mA @ 33.0V MAX) HB-3 NS6-221 OR NS4-221 : 46mA (77mA @…
Conventional Detector Base 6" NS6 base is an electronics-free 6" base featuring a plastic tamper-lock lug. Each base is equipped with a resistor. The NS4 base is a 4" version of the NS6 base. Product code: NS6-224 OR NS4-224 : 43mA (70mA @ 33.0V MAX) HB-5 NS6-220 OR NS4-220 : 93mA (136mA @ 33.0V MAX) HB-3 NS6-221 OR NS4-221 : 46mA (77mA @…
Banshee EXCEL Sounder White Standard Base The Banshee Excel Lite™ combines the aesthetics and performance of the Excel Sounder with either a very bright and efficient Xenon Beacon (CHX model) or a low-current LED Beacon (CHL model). The sounder is fitted with a professional capsule driven horn and comes with 32 user-selectable tones incorporating low frequencies, high frequencies, European, American…
Banshee EXCEL Sounder Grey Standard Base The Banshee Excel Lite™ combines the aesthetics and performance of the Excel Sounder with either a very bright and efficient Xenon Beacon (CHX model) or a low-current LED Beacon (CHL model). The sounder is fitted with a professional capsule driven horn and comes with 32 user-selectable tones incorporating low frequencies, high frequencies, European, American…
Banshee EXCEL Sounder Red Standard Base The Banshee Excel Lite™ combines the aesthetics and performance of the Excel Sounder with either a very bright and efficient Xenon Beacon (CHX model) or a low-current LED Beacon (CHL model). The sounder is fitted with a professional capsule driven horn and comes with 32 user-selectable tones incorporating low frequencies, high frequencies, European, American…
Banshee Excel CH - White, Deep Base IP66 The Banshee Excel Lite™ combines the aesthetics and performance of the Excel Sounder with either a very bright and efficient Xenon Beacon (CHX model) or a low-current LED Beacon (CHL model). The sounder is fitted with a professional capsule driven horn and comes with 32 user-selectable tones incorporating low frequencies, high frequencies,…
Banshee Excel CH - Grey, Deep Base IP66 The Banshee Excel Lite™ combines the aesthetics and performance of the Excel Sounder with either a very bright and efficient Xenon Beacon (CHX model) or a low-current LED Beacon (CHL model). The sounder is fitted with a professional capsule driven horn and comes with 32 user-selectable tones incorporating low frequencies, high frequencies,…
Banshee EXCEL Sounder Red Deep Base The Banshee Excel Lite™ combines the aesthetics and performance of the Excel Sounder with either a very bright and efficient Xenon Beacon (CHX model) or a low-current LED Beacon (CHL model). The sounder is fitted with a professional capsule driven horn and comes with 32 user-selectable tones incorporating low frequencies, high frequencies, European, American…
EXCEL LITE Red - Red Sounder LED Beacon Standard Base The Banshee Excel Lite™ combines the aesthetics and performance of the Excel Sounder with either a very bright and efficient Xenon Beacon (CHX model) or a low-current LED Beacon (CHL model). The sounder is fitted with a professional capsule driven horn and comes with 32 user-selectable tones incorporating low frequencies,…
EXCEL LITE Red - Red Sounder LED Beacon Deep Base The Banshee Excel Lite™ combines the aesthetics and performance of the Excel Sounder with either a very bright and efficient Xenon Beacon (CHX model) or a low-current LED Beacon (CHL model). The sounder is fitted with a professional capsule driven horn and comes with 32 user-selectable tones incorporating low frequencies,…
ClamBell 24 V 6" Fire Alarm Bell - Deep Base - Red EN54-3 The ClamBell® is the first newly developed and approved bell to be launched globally in decades and the only fire alarm bell made in Europe. It has been carefully designed to combine core elements of popular existing designs with innovative new features to ensure consistent, reliable and…
ClamBell 230 V 6" Fire Alarm Bell - Deep Base - Red EN54-3 The ClamBell® is the first newly developed and approved bell to be launched globally in decades and the only fire alarm bell made in Europe. It has been carefully designed to combine core elements of popular existing designs with innovative new features to ensure consistent, reliable and…
ClamBell 12 V 6" Fire Alarm Bell - Shallow Base - Red The ClamBell® is the first newly developed and approved bell to be launched globally in decades and the only fire alarm bell made in Europe. It has been carefully designed to combine core elements of popular existing designs with innovative new features to ensure consistent, reliable and predictable…
ClamBell 24 V 6" Fire Alarm Bell - Shallow Base - Red EN54-3 The ClamBell® is the first newly developed and approved bell to be launched globally in decades and the only fire alarm bell made in Europe. It has been carefully designed to combine core elements of popular existing designs with innovative new features to ensure consistent, reliable and…
ClamBell 24 V 6" Fire Alarm Bell - Weatherproof - Red EN54-3 The ClamBell® is the first newly developed and approved bell to be launched globally in decades and the only fire alarm bell made in Europe. It has been carefully designed to combine core elements of popular existing designs with innovative new features to ensure consistent, reliable and predictable…
FIRE-CRYER® PLUS EN 54-3 APPROVED VOICE SOUNDER Red, Deep Base IP66 The Fire-Cryer® Plus requires no special wiring and can be retrofitted to existing installations. They are fully synchronised and have an exceptionally low current consumption. The units can be used as a replacement with electronic sounders or bells to broadcast a clear message for any situation - evacuation, chemical spills,…
STROBELL - COMBINED FIRE ALARM BELL & VISUAL INDICATING DEVICE Manufactured by Vimpex in the UK, the StroBell® is a combined fire alarm bell and visual indicating device which is ideal for installations that require both a traditional bell tone as well as a visual alarm. The StroBell® uses the same hinged design as the ClamBell® meaning installers benefit from…
FIRE-CRYER® PLUS EN 54-3 APPROVED VOICE SOUNDER Red Sounder Standard Base The Fire-Cryer® Plus requires no special wiring and can be retrofitted to existing installations. They are fully synchronised and have an exceptionally low current consumption. The units can be used as a replacement with electronic sounders or bells to broadcast a clear message for any situation - evacuation, chemical…
FIRE-CRYER® PLUS EN 54-3 APPROVED VOICE SOUNDER Red Sounder Beacon Deep Base The Fire-Cryer® Plus requires no special wiring and can be retrofitted to existing installations. They are fully synchronised and have an exceptionally low current consumption. The units can be used as a replacement with electronic sounders or bells to broadcast a clear message for any situation - evacuation,…
FIRE-CRYER® PLUS EN 54-3 APPROVED VOICE SOUNDER Red with Red Beacon, Standard Base The Fire-Cryer® Plus requires no special wiring and can be retrofitted to existing installations. They are fully synchronised and have an exceptionally low current consumption. The units can be used as a replacement with electronic sounders or bells to broadcast a clear message for any situation -…
FIRE-CRYER® PLUS EN 54-3 APPROVED VOICE SOUNDER The Fire-Cryer® Plus requires no special wiring and can be retrofitted to existing installations. They are fully synchronised and have an exceptionally low current consumption. The units can be used as a replacement with electronic sounders or bells to broadcast a clear message for any situation - evacuation, chemical spills, access message, security…
FIRE-CRYER® PLUS EN 54-3 APPROVED VOICE SOUNDER The Fire-Cryer® Plus requires no special wiring and can be retrofitted to existing installations. They are fully synchronised and have an exceptionally low current consumption. The units can be used as a replacement with electronic sounders or bells to broadcast a clear message for any situation - evacuation, chemical spills, access message, security…
FIRE-CRYER® PLUS EN 54-3 APPROVED VOICE SOUNDER White, Deep Base IP66 The Fire-Cryer® Plus requires no special wiring and can be retrofitted to existing installations. They are fully synchronised and have an exceptionally low current consumption. The units can be used as a replacement with electronic sounders or bells to broadcast a clear message for any situation - evacuation, chemical…
FIRE-CRYER® PLUS EN 54-3 APPROVED VOICE SOUNDER White, Standard Base The Fire-Cryer® Plus requires no special wiring and can be retrofitted to existing installations. They are fully synchronised and have an exceptionally low current consumption. The units can be used as a replacement with electronic sounders or bells to broadcast a clear message for any situation - evacuation, chemical spills,…
FIRE-CRYER® PLUS EN 54-3 APPROVED VOICE SOUNDER White with Red Beacon, Deep Base IP66 The Fire-Cryer® Plus requires no special wiring and can be retrofitted to existing installations. They are fully synchronised and have an exceptionally low current consumption. The units can be used as a replacement with electronic sounders or bells to broadcast a clear message for any situation…
FIRE-CRYER® PLUS EN 54-3 APPROVED VOICE SOUNDER White with Red Beacon, Standard Base The Fire-Cryer® Plus requires no special wiring and can be retrofitted to existing installations. They are fully synchronised and have an exceptionally low current consumption. The units can be used as a replacement with electronic sounders or bells to broadcast a clear message for any situation -…
