FC3-A-R-0-D
FIRE-CRYER® PLUS EN 54-3 APPROVED VOICE SOUNDER Red, Deep Base IP66
The Fire-Cryer® Plus requires no special wiring and can be retrofitted to existing installations. They are fully synchronised and have an exceptionally low current consumption. The units can be used as a replacement with electronic sounders or bells to broadcast a clear message for any situation – evacuation, chemical spills, access message, security or general information.
Where staged alarm, lockdown or phased evacuation is required the addition of the Message Controller allows up to 7 different messages to be broadcast across multiple zones on just 2 wires.
The strobe is not intended to be the primary source of alarm and a such has not been assessed for compliance to EN 54-23.
Choose from standard message sets in the data sheet
Product code : FC3/A/R/0/D
Description
Main feature :
- Sound output – 100 dB(A)
- Optional integral strobe – red lens with red LED
- Low current – average 20 mA
- No special wiring, easily retro-fitted
- Fully synchronised over multi-zones
- Deep base version available to IP66
- 7 user-definable messages from a library of hundreds
SPECIFICATION
- Operating Voltage : 20-28 V dc
- Current @ 24 V dc, Peak/Avg – Sounder only : 27/20 mA
- Current @ 24 V dc, Typical – Sounder with low current strobe : 33/26 mA
- Current @ 24 V dc, Typical – Sounder with high current strobe : 52/60 mA
- Current @ 24 V dc – Low current strobe only : 13 mA
- Current @ 24 V dc – High current strobe only : 32 mA
- Strobe Output (Low) : 2 Cd
- Strobe Output (High) : 6 Cd
- Effective Sound Output (Typical)
– Alert Fast Sweep tone to BS5839 : 100 dB (A)*
– Voice : 95 dB (A)** - Volume Adjustment from minimum output to maximum output – 18 dB(A) : 82 to 100 dB(A)
- Weatherproofing (IP66 requires Deep Bse) : IP45 or IP66
- Housing Material : ABS
- Temperature Range : -25°C to +70°C
- Colour : Red or White
- Connections : Screw TB 1.5 mm2
PART NUMBERS – SOUNDER
FC3/A/R/0/S: Red, Standard Base
FC3/A/R/0/D: Red, Deep Base IP66
FC3/A/W/0/S: White, Standard Base
FC3/A/W/0/D: White, Deep Base IP66
FC3/A/R/R/S: Red with Red Beacon, Standard Base
FC3/A/R/R/D: Red with Red Beacon, Deep Base IP66
FC3/A/W/R/S: White with Red Beacon, Standard Base
FC3/A/W/R/D: White with Red Beacon, Deep Base IP66
PART NUMBERS – SPARES & ACCESSORIES
FC3/ZEP: Zone Extension PCB (Can only to be used with FC3/MMSP)
FC3/EP2: Extinguishant Interface for use with Sigma XT Panels
VMC/02/01/05: Boxed with Message Controller (Metal Enclosure c/w
FC3/MMSP+FC3/ZEP+5.25A PSU)
VMC/02/02/02: Boxed with Message Controller (Metal Enclosure c/w
FC3/MMSP+2.5A PSU)
Click on the links below to download the following attachments:
FIRE-CRYER® PLUS EN 54-3 APPROVED VOICE SOUNDER Data Sheet.pdf