Fireray® 3000 The Fireray® 3000 End-to-End Infrared Optical Beam Smoke Detector (OBSD) has been designed using the latest optical technology, incorporating modern industrial, electronic and software techniques. This detector offers cost effective protection of large, open area spaces with high ceilings. It is also very suited to applications where access to ceiling mounted smoke detectors presents practical difficulties. Product code: …
Fireray® 5000 The Fireray® 5000 motorised reflective, auto aligning infrared optical beam smoke detector can be installed with up to two detector heads per system, thus saving on installation time and costs. In addition, each system controller houses two pairs of fire and fault relays, one per detector. This innovative system has been designed from the ground up to include…
Fireray® One With no specialist tools or knowledge needed for installation and operation, the Fireray® One is a standalone beam detector that prioritises ease of installation. Using the Fireray One, it couldn’t be easier to bring the benefits of beam detection to your application: Auto-Aligns – using the integrated user interface – just steer the laser onto the Reflector, then…
Fireray® 3000 Ex d The Fireray® 3000 Ex d comprises of a Transmitter Unit, which projects a modulated infra-red light beam to a Receiver Unit. The received signal is analysed and should smoke be present for a predetermined time a fire condition is signalled. A Control Unit is located within 100 metres cable run of the Receiver Unit enabling low…
Projected Beam Detector The Hochiki SPC-24 Projected Beam Smoke Detector consists of an emitter and receiver. The SPC-24 detector should be placed so that smoke generated by a fire will likely rise into the path of the beam. The receiver is constantly monitoring and measuring the intensity of the beam transmitted by the emitter. Should the smoke from a fire…
Conventional Detector Base 6" NS6 base is an electronics-free 6" base featuring a plastic tamper-lock lug. Each base is equipped with a resistor. The NS4 base is a 4" version of the NS6 base. Product code: NS6-224 OR NS4-224 : 43mA (70mA @ 33.0V MAX) HB-5 NS6-220 OR NS4-220 : 93mA (136mA @ 33.0V MAX) HB-3 NS6-221 OR NS4-221 : 46mA (77mA @…
Vesda Xtralis OSE-HPW | Emitter - High Power, Wired Using battery powered Emitters, with a guaranteed 5 year life, drastically reduce the wiring and installation costs Each emitter (up to 7) generates 2 light beams in the UV and IR frequencies. These bundles are also encoded through a unique code recognized by the receiver. This approach allows the receiver to…
Vesda Xtralis OSE-SPW | OSID-DE Emitter - Standard Power, Wired Using battery powered Emitters, with a guaranteed 5 year life, drastically reduce the wiring and installation costs Each emitter (up to 7) generates 2 light beams in the UV and IR frequencies. These bundles are also encoded through a unique code recognized by the receiver. This approach allows the receiver…
OSID BEAM DETECTION Imager - 7º coverage Open-area Smoke Imaging Detection (OSID) by Xtralis is a new innovation in projected beam smoke detection technology. By using advanced dual wavelength projected beams and optical imaging technology for early warning smoke detection, OSID provides a low-cost, reliable and easy-to-install solution that overcomes typical beam detection issues such as false alarm incidents and…
OSID BEAM DETECTION Imager - 80º coverage Open-area Smoke Imaging Detection (OSID) by Xtralis is a new innovation in projected beam smoke detection technology. By using advanced dual wavelength projected beams and optical imaging technology for early warning smoke detection, OSID provides a low-cost, reliable and easy-to-install solution that overcomes typical beam detection issues such as false alarm incidents and…
OSID Environmental Housing for Emitters Custom designed IP 66, NEMA 4-4X protective and environmental housings protect OSID imagers and emitters from dust and water ingress in industrial environments. The housings are only to be used with 1 on 1 systems. The glazed housings are made of ABS. The glass window causes minimal attenuation of the UV and IR beams. Installation…
OSID Environmental Housing for Imagers Custom designed IP 66, NEMA 4-4X protective and environmental housings protect OSID imagers and emitters from dust and water ingress in industrial environments. The housings are only to be used with 1 on 1 systems. The glazed housings are made of ABS. The glass window causes minimal attenuation of the UV and IR beams. Installation…
Vesda Xtralis OSE-SP-01 | OSID-DE Emitter Alkaline Battery, Standard Power, Battery Version Using battery powered Emitters, with a guaranteed 5 year life, drastically reduce the wiring and installation costs Each emitter (up to 7) generates 2 light beams in the UV and IR frequencies. These bundles are also encoded through a unique code recognized by the receiver. This approach allows…
OSID-R (Reflective) Smoke Beam Detector Conventional Imaging Beam Smoke Detector incl Reflector OSID-R is the latest addition to the OSID open area smoke detection range utilizing the latest CMOS imaging technology to deliver rapid and trouble free detection with a lower total cost of ownership; ideal for protecting buildings with large open spaces. The CMOS technology allows the detector to…
OSID Reflective Imaging Smoke Beam Detector stainless steel Conventional imaging beam smoke detector including reflector, UL listed Product code: OSI-R-SS : Conventional imaging beam smoke detector including reflector, UL listed OSP-002 : Laser alignment tool OSP-004 : Test filter, 10-pack RTS151 : Remote test station RTS151KEY : Test and reset station with key lock, flush mount, UL listed RTS151KEY-A :…
Light Shield for OSID Imagers Beam detectors are susceptible to saturation from direct sunlight most often when installed in an East-West direction and when the sun is low on the horizon. Background subtraction techniques and IR and UV filters make OSID far less susceptible to saturation than standard IR beams. OSID will never false alarm due to bright sunlight. However,…
OSI-RS Imager Reset Station This reset station can be connected directly to an OSID imager’s reset input and remote alarm led output. The station can also be used with FastTrace 2 in SmokeTrace PLUS applications. The unit and connection is multi-purpose, the leds can also be driven from a 12 VDC or 24VDC source Product Code: OSI-RS
OSID Installation Kit The OSID Installation Kit (OSID-INST) is used in commissioning and maintaining the correct operation of the OSID Smoke Detector. 1 x Laser alignment tool 1 x Test filter 1 x PC cable 1 x Cleaning cloth 1 x Manual Product Code: OSID-INST
Wire Guard for Imager and Emitter This steel cage is designed to protect OSID Imagers and Emitters from vandalism and accidental damage. The cage is constructed of heavy gauge steel wire with corrosion resistant polyester coating. Installation and servicing are easy. Highly recommended for areas where abuse to beams is severe. Product Code: OSID-WG
